Adani New Industries Limited (ANIL), a wholly owned subsidiary of Adani Enterprises Limited, has started production of 91.2-metre onshore wind turbine blades at its integrated manufacturing facility in Mundra, Gujarat. In a media release issued from Ahmedabad on 16 November 2026, the company says the Adani Wind 91.2 m blade is the longest wind turbine blade manufactured in India. It also says its MWL185-5.0 MW turbine platform has secured certification that clears the way for serial production.
Adani Wind 91.2 m blade: what was announced
The blades are designed for the MWL185-5.0 MW turbine, which has a rotor diameter of 185 metres and a hub height of 140 metres. The company describes the rotor as the largest in India. The rotor sweeps nearly 26,600 square metres, which the company equates to more than three and a half standard football pitches. According to the company, the platform is built to harness varying wind speeds, giving a more consistent generation profile, better use of the available wind resource and a higher capacity utilisation factor (CUF).
At Mundra, the facility currently produces blades of 78.6 metres and 80.5 metres. The company says that scaling up to 91.2 metres is a substantial step in blade design, materials engineering, manufacturing precision and handling capability. The “longest in India” and “largest rotor in India” descriptions are the company’s own claims.
Certification by WindGuard
The MWL185-5.0 MW platform has been certified by WindGuard Certification GmbH, which the company describes as an independent German wind turbine testing and certification body. The certification followed prototype testing at the platform’s installation site in Mundra, Gujarat. The company says it confirms conformity with the internationally recognised IEC 61400 series of standards for wind turbine design, testing and manufacturing. The turbine is built in partnership with W2E (Wind to Energy), which the company calls its German technology partner.
What the company said
Mr Milind Kulkarni, Chief Executive Officer of Adani Wind, said that producing India’s longest wind turbine blade and securing certification for the 5 MW platform mark an important milestone for Adani Wind and the country’s wind manufacturing sector. He said that larger blades and higher-capacity turbines let each machine capture more energy, including at sites with lower wind speeds, which helps broaden the geography available for wind generation.
The release adds that the platform is designed to improve energy capture at low and moderate wind locations, which could make a wider range of sites technically and commercially viable for wind projects. Output of a turbine depends on its rotor swept area, rated capacity, hub height and the wind resource at the site.
About Adani Wind
Adani Wind is the wind manufacturing division of ANIL. According to the release, it has three turbine platforms listed under the Ministry of New and Renewable Energy’s Approved List of Models and Manufacturers for wind (ALMM-Wind). It describes itself as the only Indian wind turbine manufacturer featured in BloombergNEF’s Global Top 15 turbine manufacturers ranking for 2025.
The company’s MWL 160-5.2 MW platform, which it calls one of the highest-capacity onshore wind turbines in India under ALMM-Wind, has crossed 2 GW of installations at Khavda, Gujarat. With recent orders, Adani Wind says its cumulative orders from independent power producers outside the Adani Group now exceed 1 GW. The company has a manufacturing capacity of 2.25 GW at present and says it plans to scale this further. It also has a technology centre in Rostock, Germany, and a dedicated research and development team in India, and its portfolio covers turbine platforms from 3.x MW to 5.x MW.
The release does not state the number of MWL185-5.0 MW turbines ordered, a delivery schedule for the 91.2-metre blades or the investment behind the new blade line. Production of the blades should not be read as an order or a delivery.
What it means for India’s clean-energy sector
Larger rotors and higher-rated turbines let a machine sweep a bigger area and, as the company says, capture more energy at sites with lower wind speeds. If this holds in field operation, it could open more locations to wind projects. Domestic production of long blades at Mundra also adds to India’s wind manufacturing base, since blades are among the largest components of a turbine. For developers, an additional certified 5 MW class platform from an Indian manufacturer adds to the choice of turbines listed under ALMM-Wind. The next points to watch are the first orders and installations of the MWL185-5.0 MW platform and the pace at which the Mundra facility scales its output.
Official references
- Adani Group, media release dated 16 November 2026, “Adani Wind Begins Production of India’s Longest Wind Turbine Blade; 5 MW Platform Certified for Serial Production”: adani.com newsroom
- Adani Group, Wind Turbine business page: adani.com

Leave a Comment