The 12th revision of MNRE’s ALMM List-II adds Gopin Semicon’s 402 MW N-type TOPCon solar cell facility in Gujarat, raising India’s total enlisted annual solar cell manufacturing capacity to approximately 37.8 GW.
New Delhi, 9 October 2026: The Ministry of New and Renewable Energy (MNRE) has issued the 12th revision of the Approved List of Models and Manufacturers (ALMM) List-II for Solar PV Cells, adding 402 MW of annual solar cell manufacturing capacity from Gopin Semicon Private Limited in Gujarat.
The revision, dated 8 October 2026, takes India’s cumulative ALMM List-II-enlisted solar cell manufacturing capacity to approximately 37.8 GW, reflecting the expansion of domestic photovoltaic manufacturing.
When MNRE first introduced List-II on 31 July 2025, it included nine manufacturing units operated by six manufacturers, with a combined annual capacity of approximately 13.07 GW. In just over 14 months, enlisted capacity has nearly tripled.
These figures represent approved annual manufacturing capacity, not actual solar cell production or electricity-generation capacity.
Gopin Semicon Added with 402 MW TOPCon Capacity
Gopin Semicon Private Limited has been enlisted for its manufacturing facility at Gopin Industrial Park, Segva, Kamrej, Surat district, Gujarat.
The facility produces N-type Tunnel Oxide Passivated Contact (TOPCon) solar cells in the G12R format.
The company’s enlisted technical specifications are:
| Parameter | Details |
|---|---|
| Manufacturer | Gopin Semicon Private Limited |
| Location | Surat, Gujarat |
| Annual enlisted capacity | 402 MW |
| Solar cell technology | N-type TOPCon |
| Cell format | G12R (210 × 182.2 mm) |
| Busbars | 16 |
| Enlisted model | GSPL_G12R |
| Average cell efficiency | 25.57% |
| Average cell power | 9.78 Wp |
| Efficiency range | 24.60–25.70% |
| Power range | 9.41–9.82 Wp |
| Enlistment validity | 8 October 2026 – 7 October 2030 |
The cells are also listed as PID-free, indicating the manufacturer’s claimed resistance to Potential-Induced Degradation.
Importantly, the reported efficiency, wattage and PID-free status are manufacturer-declared specifications and should not be interpreted as unconditional performance guarantees.
The new inclusion strengthens Gujarat’s solar manufacturing presence alongside facilities operated by Mundra Solar, ReNew Photovoltaics, Waaree Energies and Reliance Industries.
Three ALMM Revisions Within Ten Days
MNRE issued three List-II revisions between 28 September and 8 October 2026, introducing new manufacturers and updating existing capacity declarations.
| Revision | Date | Key development |
|---|---|---|
| 12th | 8 Oct 2026 | Gopin Semicon added with 402 MW TOPCon capacity |
| 11th | 5 Oct 2026 | Premier Energies’ Mono-PERC capacity increased to 1,280 MW |
| 10th | 28 Sep 2026 | Jupiter Solartech added with 1,297 MW TOPCon capacity |
Under the 11th revision, Premier Energies Photovoltaic’s Mono-PERC capacity increased from 751 MW to 1,280 MW, representing a net addition of 529 MW. This is separate from its previously enlisted 1,358 MW TOPCon capacity.
The revision also updated Renewsys India’s declared cell-efficiency range to 20.50–25.80%.
Earlier, the 10th revision included Jupiter Solartech’s 1,297 MW N-type TOPCon facility in Baddi, Himachal Pradesh, and Renewsys India’s 552 MW Telangana capacity.
MNRE specifies that a manufacturing unit’s capacity shown in a revised list represents its updated total enlisted capacity, not necessarily an entirely new addition.
Therefore, calculating national capacity growth requires comparing successive revisions to avoid double-counting.
India’s Solar Cell Industry Shifts Towards N-Type Technology
India’s solar cell manufacturing industry is increasingly moving from conventional P-type Mono-PERC technology towards higher-efficiency N-type TOPCon and Heterojunction Technology (HJT).
TOPCon cells use a thin tunnel oxide and passivated contact structure to reduce charge-carrier recombination, improving photovoltaic conversion efficiency.
The adoption of larger G12R rectangular cells also supports advances in module design, power output and manufacturing efficiency.
Manufacturers including Premier Energies, Mundra Solar, Waaree Energies, EMMVEE Energy and Jupiter Solartech have enlisted TOPCon products under ALMM List-II.
HJT technology is also represented, including Reliance Industries’ 1,238 MW manufacturing facility in Jamnagar.
These developments reflect the growing adoption of advanced photovoltaic technologies within India’s domestic solar manufacturing industry.
Why ALMM List-II Matters for Solar Developers
The ALMM framework was established under the Approved Models and Manufacturers of Solar Photovoltaic Modules (Requirements for Compulsory Registration) Order, 2019.
It comprises two principal lists:
- ALMM List-I: Approved solar PV module manufacturers and models.
- ALMM List-II: Approved solar PV cell manufacturers and models.
The framework aims to strengthen product traceability, manufacturing accountability and compliance in specified solar projects.
ALMM List-II requirements became applicable from 1 June 2026, subject to exemptions and transitional provisions.
Applicable projects must use modules manufactured with cells from List-II-enlisted facilities while also complying with the relevant List-I requirements.
For solar developers and EPC contractors, this directly influences equipment procurement, supplier selection and project compliance planning.
Key ALMM Exemptions and Compliance Deadlines
MNRE has issued clarifications to address projects at different stages of procurement and commissioning.
Competitively Bid Projects
Eligible projects with a final bid submission deadline on or before 31 August 2025, whose bids were live on 28 July 2025, may qualify for List-II exemptions, subject to applicable tender conditions.
Net-Metering and Open-Access Projects
Projects commissioned by 31 December 2026 qualify for the specified List-II transitional exemption.
From 1 January 2027, projects not covered by another exemption must comply with applicable List-II requirements.
Residential Rooftop Solar
MNRE has provided additional transitional provisions for certain qualifying residential rooftop projects under PM Surya Ghar, including specified cases extending to 31 March 2027.
Other project-specific exemptions may also apply depending on ownership, procurement arrangements and the relevant MNRE clarification.
Developers should therefore verify the applicable rules before finalising solar module and cell procurement.
ALMM Framework Expands Towards Solar Wafers
MNRE has also amended the ALMM framework to include solar wafers, extending regulatory attention further upstream in photovoltaic manufacturing.
The solar value chain includes polysilicon, ingots, wafers, cells and modules.
Developing domestic manufacturing capability across these stages can support greater supply-chain resilience and reduce dependence on imported components.
However, approved manufacturing capacity must be distinguished from actual production, factory utilisation and commercial availability.
Industry Outlook
India’s increase from approximately 13.07 GW to 37.8 GW of enlisted annual solar cell manufacturing capacity demonstrates the growing scale of facilities covered under ALMM List-II.
Additional manufacturers can broaden the domestic supplier base and support compliance-driven procurement.
However, manufacturing competitiveness will depend on production yields, cell efficiency, equipment reliability, costs and consistent product availability.
For project developers, regulatory compliance and supplier qualification will remain important as ALMM requirements evolve.
Conclusion
MNRE’s addition of 402 MW of N-type TOPCon manufacturing capacity from Gopin Semicon marks another milestone in India’s domestic solar cell industry.
With total ALMM List-II-enlisted capacity approaching 38 GW, the latest revision reflects continued manufacturing expansion and growing adoption of advanced photovoltaic technologies.
As India’s solar sector develops, domestic manufacturing capability, technology efficiency, product quality and regulatory compliance will be essential to building a reliable and competitive solar supply chain.
Official references
MNRE – 12th Revision of ALMM List-II, 8 October 2026-https://mnre.gov.in/en/notice/12th-revision-of-almm-list-ii-for-solar-pv-cells-dated-08-10-2026/
MNRE – 11th Revision, 5 October 2026-https://cdnbbsr.s3waas.gov.in/s3716e1b8c6cd17b771da77391355749f3/uploads/2026/10/20261006940961081.pdf
MNRE – 10th Revision, 28 September 2026-https://cdnbbsr.s3waas.gov.in/s3716e1b8c6cd17b771da77391355749f3/uploads/2026/09/202609291561386241.pdf
MNRE – ALMM List-II Clarification, 4 August 2026-https://cdnbbsr.s3waas.gov.in/s3716e1b8c6cd17b771da77391355749f3/uploads/2026/08/20260804911824842.pdf
MNRE – Official ALMM Portal-https://mnre.gov.in/en/approved-list-of-models-and-manufacturers-almm/
Leave a Comment